Metal Workshop Services in Accra, Drawing to Installation

Eight services under one roof in Bubiashie. Come in at any stage, or hand us the whole job and let it stay in one building.

Tell us about your project
  • Drawing, cutting, forming, welding and finishing in one building
  • Working in metal since 2000
  • Installed by the people who built it

The chain

Our Metal Workshop Services, Stage by Stage

Five of our eight services are consecutive stages of making one piece: draw it, cut it, form it, weld it, finish it.

Most metalwork fails at a handover, not at a joint. A part that travels between a draughtsman, a cutter, a fabricator and a paint shop picks up a new tolerance and a new excuse at every stop. Here the stages sit in one building, so you can buy one of them or all five.

You can start at any stage. There is no need to begin at 01.

Every service

All Eight Metal Services in Accra

The eight services cover design and CAD, laser cutting, CNC forming, welding, spraying and finishing, interiors, refurbishment and landscaping.

Two fabricators in protective equipment reviewing a printed document in the workshop

Prototype, Design & CAD

A sketch or a brief becomes a dimensioned drawing you approve before anything is made.

See the detail
Copper panel engraved with adinkra symbols, close crop across the engraved line

Laser Cutting & Engraving

Patterns and profiles cut straight from your file, with a test cut in your real material first.

See the detail
Worker in protective equipment operating a machine in the Accents and Art workshop

CNC Bending & Forming

Sheet folded to a calculated flat pattern, with a measured first-off part before the batch.

See the detail
Welder in a face shield joining a steel frame, sparks crossing the workbench

Welding & Fabrication

Gates, balustrades, staircases and structural steel welded up and installed by the same team.

See the detail
Gold finished metal screens cut with a tree pattern, fitted across a building frontage

Spraying & Finishing

Preparation and protective coating, so the piece leaves ready for where it has to stand.

See the detail
Sitting room with a timber and metal table, upholstered seating and framed artwork

Interior Design

Rooms specified as a whole, then furnished with pieces made to the room's own dimensions.

See the detail
Landscaped walkway with paving, planting and a metal sculpture in the grounds

Landscaping

Screens, seating, planters and sculpture that give an outdoor space its structure.

See the detail
Bench built around a reclaimed vehicle tailgate, standing outdoors

Refurbishment

Assessment first, then repair, remaking and refinishing for metalwork worth keeping.

See the detail

Why one workshop

Why Choose Accents & Art for Metalwork in Accra

Keeping every stage in one building removes the handovers where tolerance, responsibility and time are usually lost.

Nothing changes hands

A part that visits four suppliers collects four tolerances and four opinions about whose fault the gap is. Keeping the chain in one building is the least glamorous advantage here and the one that shows up in the finished work.

Sculpture and structure

The same workshop that fabricates load-carrying staircases also makes public sculpture. That is unusual, and it is why a railing here can carry a designed idea instead of a catalogue profile.

Drawn before it is made

Every piece exists as a dimensioned drawing you have approved before any metal is cut. Moving a line costs nothing. Moving a weld costs a week.

55+People in the workshopclient figure
900+Projects deliveredclient figure
2000Making metal sinceverified

Common questions

Metal Workshop Services FAQs

A job can run through all five fabrication stages or stop at any one of them, and you are quoted for only the stages you use.

A whole job, and that is the reason the services are arranged this way. A part can arrive as a sketch, be drawn, cut, formed, welded and finished without leaving Bubiashie, which removes four handovers and the arguments that come with them. It can also come in at any single stage: plenty of work here is one operation on somebody else's components.

If you know what the piece is and roughly what it looks like, start with Welding and Fabrication. If it only exists as an idea or a photograph, start with Prototype, Design and CAD, because a drawing is what every later stage works from. If you already own the piece and want it saved rather than replaced, start with Refurbishment.

Both, and the difference is what you send us. A homeowner usually sends photographs and an opening size. A specifier usually sends a CAD drawing or a schedule and needs a fabrication drawing, a materials list and a programme back. The workshop is the same; the paperwork either side of it is not.

The workshop is in Bubiashie, Accra, and installation covers Greater Accra. Coverage beyond Greater Accra is still to be confirmed. Send the site address with your enquiry and it will be answered before anything is quoted.

Start here

Tell Us About Your Project

Describe the piece and we will tell you which of the eight services it actually needs, and what each stage costs.

If you already know which service you want, go straight to it above. If you do not, send us the project and we will point you at the right one.

Send your project+233 302 223395